2017-02-13 David Schweikert * Version 4.0-rc3 * INCOMPATIBILE CHANGE: fping and fping6 unification fping and fping6 are now unified into one binary. It means that, for example, doing 'fping google.com' is going to ping the IPv6 IP of google.com on IPv6-enabled hosts. If you need exact compatibility with old versions, you can configure and install fping twice: once for ipv4, and once for ipv6: - ./configure --disable-ipv6; make clean install - ./configure --disable-ipv4 --program-suffix=6; make clean install * INCOMPATIBILE CHANGE: -n option, not the same as -d anymore Option -n / --name is now doing a reverse-DNS lookups on host addresses, only they are given as IP address, but not for hostnames. For example, if you write 'fping -n google.com', fping would previously do a forward-DNS lookup on google.com, and then a reverse-DNS lookup on the resolved IP address. Now, it is just going to keep the name 'google.com'. That same behavior can be achieved with the option -d / --rdns (which was previously an alias for -n). fping<4.0 fping>=4.0 fping -n NAME NAME->IP->IPNAME NAME fping -d NAME NAME->IP->IPNAME NAME->IP->IPNAME * INCOMPATIBILE CHANGE: discard late packets fping will now discard replies, if they arrive after the defined timeout for reply packets, specified with -t. This change is relevant only for the counting and looping modes, where the measured times should now be more consistent (see github issue #32 for details). To prevent loosing reply packets because of this change, the default timeout in counting and looping modes is now automatically adjusted to the period interval (up to 2000 ms), but it can be overriden with the -t option. The default timeout for non-looping/counting modes remains 500 ms. * INCOMPATIBLE CHANGE: no restrictions by default fping will not enforce that -i is >= 1 and -p >= 10 anymore, except if you ./configure with the new '--enable-safe-limits' parameter. The reasoning to removing the restrictions by default, is that users can clog the network with other tools anyway, and these restrictions are sometimes getting in the way (for example if you try to ping a lot of hosts). * INCOMPATIBLE CHANGE: default interval (-i) changed from 25ms to 10ms The default minimum interval between ping probes has been changed from 25ms to 10ms. The reason is that 25ms is very high, considering today's fast networks: it generates at most 31 kbps of traffic (for IPv4 and default payload size). * (feature) Unified 'fping' and 'fping6' into one binary (#80) * (feature) Long option names for all options * (feature) --enable-ipv6 is now default * (feature) New option -4 to force IPv4 * (feature) New option -6 to force IPv6 * (feature) Keep original name if a hostname is given with -n/--name * (feature) Option -d/--rdns now always does a rdns-lookup, even for names (name->IP->name), as '-n' was doing until now * (feature) Enforce -t timeout on reply packets, by discarding late packets (#32) * (feature) Auto-adjust timeout for -c/-C/-l mode to value of -p * (feature) -i/-p restrictions only enforced with ./configure --enable-safe-limits * (feature) Default interval -i changed from 25ms to 10ms * (bugfix) Fix compatibility issue with GNU Hurd * (other) A C99 compiler is now required * (other) Option parsing with optparse (https://github.com/skeeto/optparse) Thanks Christopher Wellons! 2017-02-09 David Schweikert * Version 3.16 * (feature) Support kernel-timestamping of received packets (#46) * (feature) Simplify restrictions: only -i >= 1 and -p >= 10 are enforced now * (bugfix) Fix option -m to return all IPs of a hostname * (bugfix) Fix option -H (ttl) for IPv6 * (bugfix) Fix option -M (don't fragment) for IPv6 * (bugfix) Fix option -O (ToS) for IPv6 * (bugfix) Fix compatibility issue with AIX (#69, @blentzgh) * (bugfix) Fix option -q not suppressing some ICMP error messages (#83) * (bugfix) Fix option -M expecting an argument, when it shouldn't * (bugfix) Fix minor issues found by Coverity Scan 2017-01-11 David Schweikert * Version 3.15 * (bugfix) Fix compiler errors on platforms other than Linux (related to the new -M option, #109) * Test suite fixes for macOS 2017-01-10 David Schweikert * Version 3.14 * (feature) Ignore network and broadcast for cidrs /31 and /32 (#102, Martin Topholm) * (feature) New option '-M' to set the "Don't Fragment" flag (#91, Don Bowman) * (feature) New option '-N' to output statistics for netdata (see: http://my-netdata.io/, #105, Costa Tsaousis) * (feature) New option '-o' to calculate total outage time (#90, @jgerbeck) * (bugfix) Exit code should be 2 when the hostname can't be resolved (fixes #98, reported by @green-fox) * (bugfix) Fix issue compliling on RHEL/Centos 7 (#95, @jbackman) * (bugfix) Lower -i limit to 1 instead of 10 * (bugfix) Improve interval preciseness of -Q reporting * (bugfix) Fix occasional false positive in -Q reporting (#97) * (bugfix) Solaris 10 portability fix (#107, Peter Bray) 2015-10-21 David Schweikert * Version 3.13 * (bugfix) Fix ICMP errors sometimes causing crashes with fping >= 3.11 (fixes #85, reported by Jamie Heilman and Bill Blough) 2015-10-14 David Schweikert * Version 3.12 * (bugfix) Fix fping6 -R (fixes #84, reported by Stuart Henderson) 2015-10-12 David Schweikert * Version 3.11 * (feature) New option -R to use random bytes instead of NULLs (#72, Anthony DeRobertis) * (feature) Small documentation and performance improvements (Ryan Underwood) * (bugfix) Fix double entries with fping -u and unreachable hosts * (internal) Use sockaddr_storage and simplify code, so that we can one day support both IPv4 and IPv6 with the same binary 2014-05-03 David Schweikert * Version 3.10 * Fix confusing error message with -g and IPv6 addresses (#58, reported by Axel Beckert) * Allow option '-f' also for non-root (since setuid privileges are dropped) * Do not retry twice DNS lookup on DNS lookup problem * Remove support for NIS groups * Better document -B backoff-factor and when it can be used (#33, Oleksiy Zagorskyi) * More tests added 2014-03-08 David Schweikert * Version 3.9 * Fix random output on socket error (reported by Aleksandrs Saveljevs, #56) * Support ppc64le architecture by including alpha libtool version (reported by Amit Kumar Gupta and Aravinda B Thunug) * Fix compilation problem on FreeBSD (#57) * Initial test suite and continous intergration (with travis-ci.org / coveralls.io) * Don't output usage information on error 2013-11-08 David Schweikert * Version 3.8 * Fix segmentation fault introduced in version 3.7 with loop mode (reported by Vlad Glagolev, #55) 2013-11-04 David Schweikert * Version 3.7 * Allow running as non-root on Mac OS X by using non-privileged ICMP (#7) * Remove unnecessary IPv6 socket options * Fix again compatibility issue with FreeBSD (Shawn Chu) * Fix fping hanging forever on permanent sendto failure (Shawn Chu) * Fix duplicate echo reply packets causing early stop in count mode (reported by Ramon Schwammberger, #53) 2013-10-10 David Schweikert * Version 3.6 * Fix loop issue after 65536 pings (reported by Peter Folk and GBert, #12) * Minimum ping data size is now 0 * Removed setsockopt IPV6_CHECKSUM, which shouldn't be set and breaks compiling on Solaris (reported by Juergen Arndt) * Fix wrong min RTT value with -Q option (reported by Alexander Ivanov, #51) 2013-05-22 David Schweikert * Version 3.5 * Fix sprint_tm buffer size crash (reported by Japheth Cleaver) * Addded -D flag to print timestamps (Toke Høiland-Jørgensen) * Fix fping6 build on OS X 10.8 (unknown contributor) * Fix compatibility issue with FreeBSD (Alexandre Raynaud, Jason Harris, #39) * Fping.spec: fix setuid permissions and provides fping6 (Marcus Vinicius Ferreira) * Re-create configure script with autoconf 2.69 for aarch64 support (Chuck Anderson, #45) 2012-09-04 David Schweikert * Version 3.4 * Revert "Output statistics to stdout instead of stderr", because it breaks tools assuming the output goes to stderr 2012-08-19 David Schweikert * Version 3.3 * Do not output icmp errors with -q (#1) * Add --enable-ipv4 and --enable-ipv6 options to configure (Niclas Zeising) * Fix removing of unreachable hosts when doing loop (Thomas Liske, #13 #23) * Fix -A for fping6 (reported by Matt LaPlante, #14) * Fix "options inet6" breaking IPv4 name resolution (reported by Matt LaPlante, #17) * Output statistics to stdout instead of stderr (suggested by Simon Leinen, #9) * Set default data size to 56 bytes on all architectures (#18) * Added contrib/fping.spec (Stephen Schaefer, #24) * Convert man-page source to POD for easier maintenance * Fix error message on DNS error for IPv6 hosts (#27) * Fix -n flag in fping6 (#28) * Man-page fix: TOS option typo (Thomas Liske, #23) * Man-page fix: inconsistency in regards to numeric arguments (Robert Henney) * Man-page fix: better description of option -q (#15) 2012-05-29 David Schweikert * Version 3.2 * Improve documentation for -g option (G.W. Haywood) * Performance optimization for big select timeouts (#10, Andrey Bondarenko) * Fix restart of select call after interrupt signal (#8, Boian Bonev) * Fix infinite loop caused by linked list corruption (#11, Boian Bonev) 2012-04-26 David Schweikert * Version 3.1 * -g option (generate): exclude network and broadcast address for cidr ranges (idea by Eric Brander) * do not explicitely check if running as root, to make it possible to install fping with linux capabilities instead of making it setuid (setcap cap_net_raw+ep fping) * ANSI C (C89) compiler now a requirement * Portability fixes * Reorganized source directory * Bugfix: fix timeout issue on Solaris (Sandor Geller) * Man-page fixes (Axel Beckert) * Added -H option to specify number of hops (Paul Duda) * Output usage information to stdout when called with -h (Paul Duda) 2011-12-28 David Schweikert * Version 3.0 * rewritten main loop for improved performance * -T parameter (select timeout) now obsolete * Maintenance taken over from unresponsive previous maintainer (anybody please step up, if you disagree) * New homepage: www.fping.org 2009-12-21 Tobi Oetiker * Version v2.4b2-to3-ipv6 * added -On option to set the TOS octet * Removed unused variables from code * updated to current autoconf standards * Merged Debian changes (see below) ---------------------------------------------------------------------- fping (2.4b2-to-ipv6-16.1) unstable; urgency=low * NMU during Moenchengladbach BSP * Fixes FTBFS on kfreebsd (Closes: #555398) * Fixes typo "Paramter" in binary -- Axel Beckert Sat, 23 Jan 2010 16:22:02 +0100 fping (2.4b2-to-ipv6-16) unstable; urgency=low * Fix the following bugs - Network byte order sensitivity was missing completely. Added hopefully all missing calls. - The sequence numbering scheme used led to packet drops. Changed it to a more senseful numbering scheme. - Some minor C programming mistakes ('=' instead of '=='). Patch by Stephan Fuhrmann; closes: #502569 * Add support for command line select timeout setting Patch by Marton Balint; closes: #502575 * Remove symlinks in /usr/sbin; closes: #377732 * Standards-Version is 3.8.0 -- Anibal Monsalve Salazar Sat, 18 Oct 2008 12:04:52 +1100 fping (2.4b2-to-ipv6-15) unstable; urgency=low * Added interface binding (-I) for fping Patch by Peter Naulls Closes: #439014 * Fixed a couple of typos in fping.8. Closes: #423180 * Added homepage control header * Bumped Standards-Version to 3.7.3 * Fixed the following lintian issue: - debian-rules-sets-DH_COMPAT -- Anibal Monsalve Salazar Mon, 03 Mar 2008 17:46:17 +1100 fping (2.4b2-to-ipv6-13) unstable; urgency=low * Fixed stdout flush problem, closes: #340146. Patch by Bart Martens . -- Anibal Monsalve Salazar Fri, 30 Dec 2005 08:30:09 +1100 fping (2.4b2-to-ipv6-12) unstable; urgency=low * Fixed "problem with option -r (retry limit)", closes: #318402. Patch by Qingning Huo . -- Anibal Monsalve Salazar Sat, 08 Oct 2005 21:26:35 +1000 fping (2.4b2-to-ipv6-11) unstable; urgency=low * Fixed "would be useful to specify 'source address' like ping for multi homed machines", closes: #198486. Patch by Marc Haber . -- Anibal Monsalve Salazar Thu, 02 Jun 2005 08:14:54 +1000 fping (2.4b2-to-ipv6-10) unstable; urgency=low * Fixed "unnecessary delay with the -c option after the last packet" (Closes: #293856). Patch by Niko Tyni -- Anibal Monsalve Salazar Sun, 06 Feb 2005 23:25:57 +1100 fping (2.4b2-to-ipv6-9) unstable; urgency=low * Fixed "fping6 always does reverse lookup" (Closes: #273647). Patch by Jeroen Massar and forwarded by Bernhard Schmidt -- Anibal Monsalve Salazar Mon, 10 Jan 2005 00:01:32 +1100 fping (2.4b2-to-ipv6-7) unstable; urgency=low * Build fping in build/ipv[46] instead of build and build-ipv6. * Made DNS errors non-fatal for IPv6 (closes: #198056). -- Herbert Xu Fri, 20 Jun 2003 21:36:30 +1000 fping (2.4b2-to-ipv6-6) unstable; urgency=low * Do not use incorrect linux.h file (closes: #85468). -- Herbert Xu Sat, 17 May 2003 14:13:11 +1000 fping (2.4b2-to-ipv6-5) unstable; urgency=low * Fixed yet another divide by zero bug (closes: #148445). -- Herbert Xu Tue, 4 Jun 2002 12:18:03 +1000 fping (2.4b2-to-ipv6-4) unstable; urgency=low * Made fping6 setuid (closes: #136386). * Moved fping back into bin. * Partially applied IPv6 patch to fix IPv6 checksums (closes: #136479). -- Herbert Xu Sun, 7 Apr 2002 20:36:56 +1000 fping (2.4b2-to-ipv6-3) unstable; urgency=low * Added compatibility symlink for fping (closes: #135203). -- Herbert Xu Sat, 23 Feb 2002 08:34:11 +1100 fping (2.4b2-to-ipv6-2) unstable; urgency=low * Fixed another divide by zero error (closes: #132370). -- Herbert Xu Thu, 7 Feb 2002 20:10:48 +1100 fping (2.4b2-to-ipv6-1) unstable; urgency=low * New upstream release. * Install fping into sbin as done by upstream. -- Herbert Xu Fri, 1 Feb 2002 22:11:59 +1100 fping (2.2b2-3) unstable; urgency=low * Removed INSTALL file from package (closes: #84050). * Fixed alignment bug. -- Herbert Xu Sat, 10 Feb 2001 19:25:18 +1100 fping (2.2b2-2) unstable; urgency=low * Made changes for dpkg-statoverride (closes: #83838). -- Herbert Xu Sun, 28 Jan 2001 21:53:05 +1100 fping (2.2b2-1) unstable; urgency=low * New upstream release. * Fixed typo that prevented -d from working (closes: #83255). * Drop root privileges after opening the socket (closes: #81589). * Fixed the options [tip], they were out by a factor of 10 (Richard Kettlewell, closes: #83742). -- Herbert Xu Sun, 28 Jan 2001 00:09:41 +1100 fping (2.2b1-2) unstable; urgency=low * Fixed typo in control file, spotted by William Ono (closes: #49909). -- Herbert Xu Mon, 15 May 2000 12:27:03 +1000 fping (2.2b1-1) unstable; urgency=low * Initial release. * Fixed divide by zero error (closes: #29902). -- Herbert Xu Sat, 30 Oct 1999 16:36:19 +1000 --------------------------------------------------------------------------------- Wed Jan 16 2002 Jeroen Massar - Revision v2.4b2-to-IPv6 - Added IPv6 support. - Added -I option for selecting source IPv4/IPv6 address. - Makefile.in now generates a Makefile which will build both fping (IPv4) and fping6 (IPv6). Thus it makes an fping (IPv4 only) and an fping6 (IPv6 only). - num_unreachable was counted twice when a sendto() generated errors. - See http://unfix.org/projects/ipv6/ Tue Mar 14 2001 Jason Ewasiuk - Revision v2.4b1 - added -g option for generating IPs from a start to an end value - two available options, generate IPs from start IP to end IP or from a passed netmask, such as 192.168.1.0/24 Thu Feb 15 2001 Jason Ewasiuk - Revision v2.3b1 - formatting changes to code layout (fping.c) NOTE: Best viewed with a tab stop of 4 - merged in changes from Debian c/o Herbert Xu - Compilation fix on alphas with glibc - Alignment issues (note from JE: in wait_for_reply()) - A typo with the time specified on the command line (note from JE: bug was using 10 instead of 100) - Drop privileges after obtaining socket (note from JE: might be moot, since prog exits if user is not root) - touched all files in package to this date - couple new #ifdefs added for future WIN32 support (Haven't got to adding this yet, will take a lot of rewriting.) Fri Dec 8 10:33:13 2000 Roland Schemers * stop using sys_errlist and start using strerror fixed bug in output of -C Wed Jan 8 11:18:37 1997 Roland Schemers * Created ChangeLog file. What follows was from the CHANGES file. * Revision 2.0 1994/10/31 21:26:23 morgan Substantial rewrite, including new features: support some traditional ping features: loop mode specify size of data packets specify how many pings to send show per-response data interpret ICMPs other than ICMP Echo response also rewrote main loop completely make timings in tenths of milliseconds do exponential backoff on retries port to more systems add some debugging stuff do better checking on whether received ICMP is for us * Revision 1.24 1993/12/10 23:11:39 schemers commented out seteuid(getuid()) since it isn't needed * Revision 1.23 1993/12/10 18:33:41 schemers Took out the -f option for non-root users. This can be enabled by defining ENABLE_F_OPTION before compiling. There is a call to access before opening the file, but there is a race condition. Reading from stdin is much safer. * Revision 1.22 1993/11/16 19:49:24 schemers Took out setuid(getuid()) and used access() system call to check for access to the file specified with "-f". * Revision 1.21 1993/07/20 18:08:19 schemers commented out the test to make sure the ping packet came from the same IP address as the one we sent to. This could cause problems on multi-homed hosts. * Revision 1.20 1993/02/23 00:16:38 schemers fixed syntax error (should have compiled before checking in...) * Revision 1.19 1993/02/23 00:15:15 schemers turned off printing of "is alive" when -a is specified. * Revision 1.18 1992/07/28 15:16:44 schemers added a fflush(stdout) call before the summary is sent to stderr, so everything shows up in the right order. * Revision 1.17 1992/07/23 03:29:42 schemers * Revision 1.16 1992/07/22 19:24:37 schemers Fixed declaration of timeval_diff. Didn't notice the problem because I use 'cc' in stead of gcc under Ultrix. Time to switch? :-) Modified file reaing so it would skip blank lines or lines starting with a '#'. Now you can do something like: fping -ad < /etc/hosts * Revision 1.15 1992/07/21 17:07:18 schemers Put in sanity checks so only root can specify "dangerous" options. Changed usage to show switchs in alphabetical order. * Revision 1.14 1992/07/21 16:40:52 schemers * Revision 1.13 1992/07/17 21:02:17 schemers Changed the default timeout to 2500 msec, and retry to 3. This was due to suggestions from people with slow (WAN) networks. The default 1 sec timeout was too fast. Added '-e' option for showing elapsed (round-trip) times on pakets, and modified the -s option to include min, max, and average round-trip times, and over all elapsed time. Modified action taken when a error is returned from sendto. The action taken now considers the host unreachable and prints the hostname followed by the errno message. The program will not exit and will continue to try other hosts. * Revision 1.12 1992/07/17 16:38:54 schemers * Revision 1.11 1992/07/17 16:28:38 schemers move socket create call so I could do a setuid(getuid()) before the fopen call is made. Once the socket is created root privs aren't needed to send stuff out on it. moved num_timeout counter. It really was for debug purposes and didn't make sense to the general public :-) Now it is the number of timeouts (pings that didn't get received with the time limit). * Revision 1.10 1992/07/16 16:24:38 schemers * Revision 1.9 1992/07/16 16:00:04 schemers * Revision 1.8 1992/07/16 05:44:41 schemers Added _NO_PROTO stuff for older compilers, and _POSIX_SOURCE for unistd.h, and _POSIX_SOURCE for stdlib.h. Also added check for __cplusplus. Now compiles ok under Ultrix 3.1, and Sun4 using cc. Also compiled ok using g++ 2.2.2. Changed '-a' and '-u' flags to be mutually exclusive (makes sense, since specifiying both '-a' and '-u' is the same as not specifiying anything. Since '-a' and '-u' are mutually exclusive, these options now only print the hostname, and not the 'is alive' or 'is unreachable' messages. This makes it much easier to do stuff like: #!/usr/local/bin/perl $hosts_to_backup=`cat /etc/hosts.backup|fping -a`; Since you don't have to strip off the 'is alive' messages. Changed usage to and stats to print to stderr instead of stdout. ----------------------------------------------------------------------------- RCS header info from original fping.c package (no longer required) /* *************************************************** * * Standard RCS Header information (see co(1)) * * $Author: schemers $ * * $Date: 1997/01/08 20:29:33 $ * * $Revision: 2.2 $ * * $Locker: $ * * $Source: /afs/ir/group/networking/src/fping/fping-2.2/src/RCS/fping.c,v $ * * $State: Exp $ * * $Log: fping.c,v $ * * Revision 2.2 1997/01/08 20:29:33 schemers * changes for autoconf/automake * * Revision 2.1 1997/01/08 19:07:18 schemers * checked in RL "Bob"'s changes before configure'ing * * Revision 2.0 1994/10/31 21:26:23 schemers * many changes by RL "Bob" Morgan * add timing data collection, loop mode, per-packet output, etc * * Revision 1.24 1993/12/10 23:11:39 schemers * commented out seteuid(getuid()) since it isn't needed * * Revision 1.23 1993/12/10 18:33:41 schemers * Took out the -f option for non-root users. This can be enabled by * defining ENABLE_F_OPTION before compiling. There is a call to * access before opening the file, but there is a race condition. * Reading from stdin is much safer. * * Revision 1.22 1993/11/16 19:49:24 schemers * Took out setuid(getuid()) and used access() system call to * check for access to the file specified with "-f". * * Revision 1.21 1993/07/20 18:08:19 schemers * commented out the test to make sure the ping packet came from the * same IP address as the one we sent to. This could cause problems on * multi-homed hosts. * * Revision 1.20 1993/02/23 00:16:38 schemers * fixed syntax error (should have compiled before checking in...) * * Revision 1.19 1993/02/23 00:15:15 schemers * turned off printing of "is alive" when -a is specified. * * Revision 1.18 1992/07/28 15:16:44 schemers * added a fflush(stdout) call before the summary is sent to stderr, so * everything shows up in the right order. * * Revision 1.17 1992/07/23 03:29:42 schemers * fixed declaration of timeval_diff. * * Revision 1.16 1992/07/22 19:24:37 schemers * Modified file reading so it would skip blanks lines or lines starting * with a '#'. Now you can do something like: * * fping -ad < /etc/hosts * * Revision 1.15 1992/07/21 17:07:18 schemers * Put in sanity checks so only root can specify "dangerous" options. * Changed usage to show switchs in alphabetical order. * * Revision 1.14 1992/07/21 16:40:52 schemers * Now when sendto returns an error, the host is considered unreachable and * and the error message (from errno) is displayed. * * Revision 1.13 1992/07/17 21:02:17 schemers * changed default timeout to 2500 msec (for WANs), and default try * to 3. This gives 10 second overall timeout. * * Added -e option for showing elapsed (round-trip) time on packets * * Modified -s option to inlude to round-trip stats * * Added #ifndef DEFAULT_* stuff its easier to change the defaults * * Reorganized main loop. * * cleaned up timeval stuff. removed set_timeval and timeval_expired * since they aren't needed anymore. Just use timeval_diff. * * Revision 1.12 1992/07/17 16:38:54 schemers * move socket create call so I could do a setuid(getuid()) before the * fopen call is made. Once the socket is created root privs aren't needed * to send stuff out on it. * * Revision 1.11 1992/07/17 16:28:38 schemers * moved num_timeout counter. It really was for debug purposes and didn't * make sense to the general public :-) Now it is the number of timeouts * (pings that didn't get received with the time limit). * * Revision 1.10 1992/07/16 16:24:38 schemers * changed usage() to use fprintf(stderr,"..."); * * Revision 1.9 1992/07/16 16:00:04 schemers * Added _NO_PROTO stuff for older compilers, and _POSIX_SOURCE * for unistd.h, and _POSIX_SOURCE for stdlib.h. Also added * check for __cplusplus. * * Revision 1.8 1992/07/16 05:44:41 schemers * changed -a and -u to only show hostname in results. This is * for easier parsing. Also added -v flag * * Revision 1.7 1992/07/14 18:45:23 schemers * initialized last_time in add_host function * * Revision 1.6 1992/07/14 18:32:40 schemers * changed select to use FD_ macros * * Revision 1.5 1992/07/14 17:21:22 schemers * standardized exit status codes * * Revision 1.4 1992/06/26 15:25:35 schemers * changed name from rrping to fping * * Revision 1.3 1992/06/24 15:39:32 schemers * added -d option for unreachable systems * * Revision 1.2 1992/06/23 03:01:23 schemers * misc fixes from R.L. "Bob" Morgan * * Revision 1.1 1992/06/19 18:23:52 schemers * Initial revision * *-------------------------------------------------- * Copyright (c) 1992, 1994, 1997 Board of Trustees * Leland Stanford Jr. University *************************************************** */